Windows 7 L2TP/IPsec Manual Installation

1Go to the "Start" and then click "Control Panel".

2Click on "View network status and tasks".

3Click on "Set up a new connection or Network".

4Click on "Connect to a workplace" then click "Next".

5Click on "Use my Internet connection (VPN)".

6In the "Internet Address" write for example: ustx.rapidvpn.net. And in the "Destination name" write: RapidVPN. Make sure that the checkbox labeled "Don't connect now; just set it up so I can connect later" is checked.
Note: To see your server IP address, login here with your username and password.

7Enter your username and password and click the "Create" button.

8Click on "Close" button.

9Click on "Change adapter settings" again (See step 1-3)

10Right-click on the "RapidVPN" connection and choose "Properties" from the menu.

11Select "Options" and make sure the checkbox labeled "Include Windows logon domain" is unchecked. Then click the "PPP Settings" button.

12In the "PPP Settings" dialog box, make sure the settings look like the ones in the picture below, then click the "OK".

13Go to the "Security" tab and make sure the security tab has the same settings as here. Then click on "Advanced settings" button.

14In the "Advanced Properties" dialog, click the radio button labeled "Use preshared key for authentication", Then write "8870680" into the textbox labeled "Key", Then click the "OK" button.

15In the next window click "OK"

16Click on "Change adapter settings" again (See step 1-3)

17Right-click on the "RapidVPN" connection and choose "Connect" from the menu.



You can see your RapidVPN connection by the following steps:
- Open Start and type "ncpa.cpl" in the search box.
OR:
- Go to the "Control Panel" and type "view network connections" in search box.