Go to the "Start" and then click "Control Panel".

Click on "View network status and tasks".

Click on "Set up a new connection or Network".

Click on "Connect to a workplace" then click "Next".

Click on "Use my Internet connection (VPN)".

In the "Internet Address" write for example: ustx.rapidvpn.net. And in the "Destination name" write: RapidVPN. Make sure that the checkbox labeled "Don't connect now; just set it up so I can connect later" is checked.
Note: To see your server IP address, login here with your username and password.

Enter your username and password and click the "Create" button.

Click on "Close" button.

Click on "Change adapter settings" again (See step 1-3)

Right-click on the "RapidVPN" connection and choose "Properties" from the menu.

Select "Options" and make sure the checkbox labeled "Include Windows logon domain" is unchecked. Then click the "PPP Settings" button.
p>
In the "PPP Settings" dialog box, make sure the settings look like the ones in the picture below, then click the "OK".

Go to the "Security" tab and make sure the security tab has the same settings as here. Then click on "OK" button.

In the next window click "OK"

Click on "Change adapter settings" again (See step 1-3)

Right-click on the "RapidVPN" connection and choose "Connect" from the menu.

You can see your RapidVPN connection by the following steps:
- Open Start and type "ncpa.cpl" in the search box.
OR:
- Go to the "Control Panel" and type "view network connections" in search box.